@pcplayground/openclaw-channel-telnyx-sms

Telnyx SMS/MMS channel extension for OpenClaw — give your AI assistant a real phone number for text messaging.

Built with AI. This extension was developed by Claude (Anthropic) with human testing, verification, and direction by Martin Rudolph. If you have questions, ideas, or want to share how you're using it, head over to Discussions.

Features

• Inbound SMS/MMS — receive text messages and media via Telnyx webhooks
• Outbound SMS/MMS — send replies as standard text messages (with optional MMS media)
• Ed25519 webhook verification — validates Telnyx webhook signatures for security
• Allowlist access control — restrict which phone numbers can message your assistant via the OpenClaw console UI
• Unknown sender gate — when someone not on the allowlist texts, optionally notify an admin via another channel (Discord, WhatsApp, etc.) with approve/deny
• Event log — in-memory ring buffer tracking the last 20 send/receive events with status codes, visible in the console status panel
• Multi-account support — run multiple phone numbers from a single OpenClaw instance
• Session continuity — each phone number gets its own conversation thread
• MMS media handling — inbound images/files are downloaded and passed to the agent
• Console UI integration — full config schema with channelConfigs so all settings (allowlist, DM policy, chunk limits, gate notifications) render natively in the OpenClaw console

Prerequisites

• OpenClaw 2025.12 or later
• A Telnyx account with:
• For US numbers: an approved 10DLC campaign (required by carriers since 2024)

Installation

npm install @pcplayground/openclaw-channel-telnyx-sms

Or add to your OpenClaw config manually — see Configuration.

Telnyx Portal Setup

Follow these steps to configure Telnyx before connecting to OpenClaw.

1. Create an API Key

1. Log into portal.telnyx.com
2. Go to Account → API Keys
3. Click Create API Key
4. Copy the key (starts with KEY...) — you'll need it for the OpenClaw config

2. Buy a Phone Number

1. Go to Numbers → Search & Buy
2. Search for a number in your desired area code
3. Ensure SMS/MMS capability is listed
4. Purchase the number

3. Create a Messaging Profile

1. Go to Messaging → Profiles
2. Click Add New Profile
3. Name it (e.g., "OpenClaw Raven")
4. Under Inbound Settings:

• Set Webhook URL to: https://your-domain.com/hooks/telnyx-sms/inbound
• Note the Public Key — you'll need it for webhook signature verification

1. Under Number Assignment:

• Assign your purchased phone number to this profile

1. Save the profile and note the Profile ID

4. Register for 10DLC (US Numbers Only)

US carriers require 10DLC registration for A2P (application-to-person) messaging:

1. Go to Messaging → 10DLC
2. Register Your Brand:

• Company name, EIN, website, contact info
• Brand type: typically "Low Volume Standard" for personal/small business

1. Create a Campaign:

• Select your brand
• Use case: "Customer Care" or "Mixed" depending on your usage
• Describe what your assistant does
• Sample messages showing typical interactions

1. Wait for approval (usually 1-3 business days)
2. Once approved, assign your number to the campaign

5. Set Up a Webhook Tunnel (for development)

If OpenClaw runs behind a firewall, you'll need a tunnel:

Using Cloudflare Tunnel:

cloudflared tunnel route dns your-tunnel your-domain.com

Using ngrok (development only):

ngrok http 18789
# Then update the webhook URL in Telnyx portal

Configuration

Add the channel to your openclaw.json:

{
  "channels": {
    "telnyx-sms": {
      // Required
      "apiKey": "KEYxxxxxxxxxxxxxxxxxxxxxxxx",
      "phoneNumber": "+15551234567",

      // Recommended
      "messagingProfileId": "your-profile-id",
      "webhookPublicKey": "your-ed25519-public-key",

      // Access control
      "dmPolicy": "allowlist",
      "allowFrom": [
        "+15559876543",
        "+15558765432"
      ],

      // Message handling
      "textChunkLimit": 1500,
      "blockStreaming": true,
      "chunkMode": "length",
      "historyLimit": 15,

      // Unknown sender gate (optional)
      "gateNotify": {
        "enabled": true,
        "notifyChannel": "discord",
        "notifyTarget": "admin-alerts",
        "rejectReply": "This number is not authorized. Your message has been forwarded for review.",
        "cooldownMinutes": 60
      },

      // Optional
      "mediaMaxMb": 1,
      "name": "Raven SMS"
    }
  }
}

Configuration Reference

Gate Notify (Unknown Sender Alerts)

When dmPolicy is "allowlist" and someone not on the list texts your number, the gate system can notify you via another configured channel instead of silently dropping the message.

Multi-Account Setup

Run multiple phone numbers by adding an accounts section:

{
  "channels": {
    "telnyx-sms": {
      // Shared defaults
      "apiKey": "KEYxxxxxxxxxxxxxxxxxxxxxxxx",
      "dmPolicy": "allowlist",

      "accounts": {
        "primary": {
          "phoneNumber": "+15551234567",
          "allowFrom": ["+15559876543"],
          "name": "My Assistant Primary"
        },
        "family": {
          "phoneNumber": "+15551234568",
          "allowFrom": ["+15558765432", "+15557654321"],
          "name": "My Assistant Family"
        }
      }
    }
  }
}

Architecture

                    ┌──────────────┐
   Inbound SMS ──▶ │    Telnyx    │
                    │   Cloud API  │
   Outbound SMS ◀──│              │
                    └──────┬───────┘
                           │ webhook POST
                           ▼
                    ┌──────────────┐
                    │  Cloudflare  │
                    │   Tunnel     │
                    └──────┬───────┘
                           │
                           ▼
                    ┌──────────────┐
                    │   OpenClaw   │
                    │   Gateway    │
                    │              │
                    │ /hooks/      │
                    │ telnyx-sms/  │──▶ Ed25519 verify
                    │ inbound      │──▶ Allowlist check
                    │              │──▶ dispatchInboundMessage()
                    │              │──▶ AI inference
                    │              │──▶ sendSmsTelnyx() reply
                    └──────────────┘

How It Works

Inbound (receiving messages):

1. Someone texts your Telnyx number
2. Telnyx POSTs a message.received webhook to your OpenClaw instance
3. The extension verifies the Ed25519 signature
4. Checks the sender against your allowlist
5. Downloads any MMS media attachments
6. Dispatches through OpenClaw's standard inference pipeline
7. Sends the AI response back via Telnyx SMS

Outbound (sending messages):

1. The AI agent decides to send a message
2. Long messages are chunked into SMS-friendly segments (~1500 chars, respecting Telnyx's 10-part concatenated SMS limit)
3. Each chunk is sent via Telnyx POST /v2/messages
4. MMS media URLs are included when the agent sends images/files

Session Routing

Each phone number gets its own session, following OpenClaw's standard dmScope routing:

• dmScope: "main" → all SMS conversations collapse to agent:main:main
• dmScope: "channel" → each phone number gets agent:main:telnyx-sms:+1XXXXXXXXXX

Security

• Webhook signatures: Ed25519 verification prevents forged inbound messages
• Replay protection: Webhooks older than 5 minutes are rejected
• Deduplication: Event IDs are tracked to prevent duplicate processing
• Allowlist: Restrict access to specific phone numbers
• No credentials in code: API keys live in openclaw.json, not in source

Troubleshooting

"Telnyx SMS: apiKey is required" Set channels.telnyx-sms.apiKey in your openclaw.json.

Messages sent but not received by the assistant

• Check that the webhook URL is correct in the Telnyx portal
• Verify your Cloudflare tunnel / ngrok is running
• Check OpenClaw logs for signature verification failures
• Ensure the sender's number is in your allowFrom list

10DLC registration rejected

• Provide clear, detailed use case descriptions
• Include realistic sample messages
• Ensure your brand website is accessible
• Try "Low Volume Standard" brand type if "Standard" is rejected

MMS media not downloading

• Telnyx media URLs expire after 30 days
• Check mediaMaxMb — default is 1MB, Telnyx max is 1MB per file
• Ensure your OpenClaw instance has outbound internet access

Contributing

PRs welcome! This project follows the OpenClaw channel plugin patterns established by the Signal and Telegram extensions.

git clone https://github.com/pcitalian/openclaw-channel-telnyx-sms.git
cd openclaw-channel-telnyx-sms
npm install
npm run build
npm test

For questions, ideas, or to share your setup, use GitHub Discussions rather than Issues — Issues are for bugs and concrete feature requests.

Credits

This extension was developed by Claude (Anthropic's AI assistant) with human testing, verification, and direction by Martin Rudolph. The architecture, code, documentation, and console UI integration were all produced through collaborative AI-human development.

License

MIT — see LICENSE